2m Round Mesh Balloon Arch on stand – White

Colour: Painted with a basic coating of Paint

Quality: Budget – Look at the photos of the mesh connections etc, they do not match on all 4 parts, scratches as also mentioned below and photographs. Mesh may have sharp points and welds.

Qty: 1 arch

Use: Indoor and Outdoor, however, you may need a weight for outdoor as the base is not weighted

Tools Required:  You will require zip ties or ribbon etc to tie the mesh panels together. We would recommend a small file, or flathead screwdriver and a small hammer on hand as sometimes there may be small bits of metal on the side of the wingnuts that is left behind from the manufacturing process that needs chipping away. This is very easy to do

Instructions: 

1. Lay all parts on the floor

2. Organise the circle part of the arch into the circle shape, ensure all wing nuts are facing up

3. Insert all the poles for the circle part of the arch together (NOTE: the holes are NOT for bolting together, those go on the opposite side to the wing nuts). You may need a file to smooth the metal around the bolt hold if the pole will not push inside. Please do not force the poles until you have used the file.

4. Tighten all Wingnuts securely, if no secure the arch will bow

5. Lift circle and place onto legs, tighten wing nuts to secure. Ensure fully tight otherwise, the frame will bow

6. Weight the base feet with sandbag weight or similar

7. Zip tie or other method of securing the mesh panels together in the middle

8. Decorate with lightweight finishing only